How to Reset GE Washer?

Getting stuck while using a GE washer is not a pleasant experience. But did you know that you can fix it without much effort? Like any other electrical appliance, GE washers have quick fixes, but most people don’t know about it.

It’s intimidating to handle and tweak machinery, which is why many people hesitate. But if you are looking for reset solutions, here’s everything you didn’t know!

How to Reset GE Washer?

You can follow these simple steps to reset a GE washer:

  1. Unplug the washer or remove the fuse
  2. If it has a timer control knob, turn it back to any position
  3. Restore the power

This is generally how most GE washers get reset. However, it’s worth mentioning that there are different types of GE washers, and it may not work for all.

What Are the Most Common Problems with A GE Washer?

GE washer typically gets stuck due to interruptions. It could happen if;

  • There’s a power failure
  • You stopped the washer before completing the cycle
  • You pressed the stop/pause button to stop the cycle

Why Do You Need to Reset the GE Washer?

Whenever you run into a problem with the GE washer, it stops functioning. But it’s generally not a hardware problem and does not require replacing some parts. That’s why the reset option is essential, and all the GE washers come equipped with it.

The GE washer needs to be reset any time you experience a problem. But the scenarios can be different depending on the type of the GE washer. It’s pretty common for GE washers to get stuck during the spin cycle. So what should you do if that happens to you? There are solutions. But the solution also depends on the type of GE washer you have. For GE HydroWave washer, here’s what you can do.

  • Unplug it and leave it for a minute
  • Plug it in
  • Lift the lid six times within thirty seconds

It’s important to note that you should close the lid completely each time. Once you do that, it should be reset. You can also apply the same procedure for ge washer stuck on sensing issues.


Other Ways To Reset GE Washer

As mentioned earlier, there are different variations of GE washers. So each washer will have different reset features, including buttons and knobs. But if you want to know the options, here are the reset methods you can apply.

Lid Lock Reset

Unplugging the machine for one minute typically works for the lid lock reset. But if you want to unlock the lid, you can pause the machine or pause the washer during the spin cycle. However, I suggest you wait until the spin cycle to avoid any other problems.

Top Load Reset

If it’s a top load washer and you want it to reset, here’s what you can do.

  • Unplug the washer for a minute
  • Plugin the washer
  • Lift and lower the lid six times

That should fix the problem and reset the top load washer.

Front Load Reset

If it’s a front loading washer, the reset process varies slightly. You can follow these steps.

  • Switch off the washer and unplug it
  • Press the start/pause button (five seconds)
  • Plug the washer

These are some of the reset options you have on GE washers. For GE washer control board reset, you can try any methods to solve the problem. But the important thing is to know what type of GE washer you have and if the controls are manual or digital.

GE Washer Error Codes

The GE washer error codes list varies according to the type of washer. But to give you an idea, here’s what you can do to retrieve the error codes in an affinity front load dryer.

  • Press any button on display to wake the machine from idle mode
  • Wait 5-10 seconds, press the start/pause and cancel buttons simultaneously
  • Wait for the indicator light to flash on the display
  • Read the error code
  • Release the pressed buttons after the error code appears

How Do You Run a Diagnostic on A GE Washer?

Troubleshooting is an effective way to minimize problems with your GE washer. That’s why before you use the washer, it’s recommended to run a diagnostic test. But how do you do that? It’s pretty simple. Here are the steps.

  1. Make sure you use the recommended amount of detergent
  2. Check the drain hose and make sure there’s no leak
  3. Check the water connections
  4. Check the lid and make sure it’s tight
  5. Make sure the power source is working
  6. Plug the power chord firmly on the socket

Other Questions

Is There a Reset Button on A GE Washing Machine?

The reset buttons and options are generally not provided individually. But there are ways to reset the washer using the available buttons, and it’s provided in the manual when you purchase the GE washer.

How to Reset GE Washer Wifi Model?

The Wifi on the GE washer will also reset once you perform any reset method.

How to Reset GE Washer Dryer Combo

The GE washer dryer combo will also reset once you reset the washer.

How to Reset GE Stackable Washer and Dryer?

You can reset the GE stackable washer and dryer with these steps.
Unplug for a minute
Plug it in, open and close the lid six times
Plug it in and switch it on

Wrapping Up

Resetting the GE washer is not as complicated as you think, and you can do it in a few steps. Despite the different types of GE washers, most of the reset methods are similar. So the next time you have questions on ‘How to reset GE washer,’ you can apply these steps to get your washer running again!