Skip to Content

As an Amazon Associate, we earn from qualifying purchases.

Should Grout Be Flush With Tile? You Don’t Need An Expert To Figure This One Out!

Have you recently installed tiles on your home walls and floors, or are you thinking of it? Let’s see why grouting is important and why you should do it well.

Grouting refers to the mixture filled in the space between tiles to level them up with the tiles. Grout is a mixture of cement, limestone, and sometimes a color pigment in certain cases. Grout is more like a filler for walls or surfaces where tiles can be or are installed.

Grouting is mostly done to protect the walls or floors of a concrete structure. It is mainly water-resistant but not completely waterproof. It is used to strengthen a foundation or to reduce the amount of water flow through it.

Grouting is also used to correct faults in concrete structures. There are mainly three types of grouts: cement grouting, chemical grouting, and then bituminous grouting.

During tile installation, grouting becomes essential. It is a way to protect the tiles and the wall for the tile setting. You can reduce the size of grout lines; however, you cannot skip the process of grouting.

Does Grout Even Out Tile

Grout must first be smoothed out to be evenly leveled with the tiles. Grout can easily fill out the tile lines and make them smooth and nice; however, ensure that none of the tiles are broken.

Grout lines make your tile pattern look seamless, even if they might not be properly straight. While grouting, use a good float and focus on your technique. Proper grouting will make your tiles seem more even and make them look seamless.

Grouting mostly depends on your technique and if you have smoothed out the grout mixture before. Your grouting technique can either mar a good tile layout or mask imperfect tile placements. Also, excess grout can be taken off by sweeping diagonally across the tiles.

How Deep Should Grout Go-Between Lines

Depending on the size and placement of the tiles, however, grout lines should be at least close to being level with the edges.

If grout lines aren’t too close or flush with the edges, it is visually bothersome, and the edges of the tiles can be felt while walking. If grout lines are very low and aren’t well filled with grout, the tile edges can also be hazardous in some cases while walking.

Also, evened-out grout lines guarantee better cleaning. Otherwise, if your grout lines aren’t flush with the tiles, some dirt will always be collected in the grout lines.

How Should Grout Look When Finished

When finished with grouting, your tile walls should look even and smooth. In the case of pigmented grout, the color should sync with your tile wall so well that you can’t pick out errors or lines.

Grouting depends on technique more than anything else, so if you have taken your time and grouted out the tile lines one by one and with care, they should look even. Properly smoothened grout mixture should take around 24-72 hours to set.

Usually, two coats are enough; however, if the grout still absorbs water or sealant, apply more coats.

What Happens If The Grout Is Not Flush

Grout should generally always be flush with tiles. If not, then the edges of the tiles can be felt while walking, and if the grout is very low than the tile edges, the surface might also cause injury to your toes.

Also, grout is responsible for evening out your tiled walls and floors- this also helps during cleaning. You don’t have to put in extra effort to clean out the lines and edges of walls where dirt might be collected.

How To Make Grout Level With Tile

The grouting process is not very difficult, but you should pay attention to the texture of your grout and the technique.

Make sure your grout has a smooth texture- you can follow the instructions on a package or manual. Make sure the mix has a uniform consistency. Let the grout rest for a while before you get to work.

When you start grouting, make sure you don’t overdo or underdo it. Scoop up the grout and spread them on the lines using a float. Even out the lines and scrape off excess grout. Go for one area at a time and not the entire wall or floor.

should grout be flush with tile
should grout be flush with tile

Usually, two coats are enough to make it flush with the tile level. After filling in the lines, give them an appropriate time to set. Later, check to see if the grout is still absorbing water- if it is, give it another coating.

What Shape Tiles Should Grout Be Flush For? What Shape Should Grout Not Be Flush For?

Grout should be flush for all square-edged tiles, and this includes rectified tiles as well. Grout should reach up to the pillowed edge in the case of non-rectified tiles. In the case of mirrored tiles, they are usually left ungrouted; however, grouting is required in the case of wet areas.

Should Grout Be Flush With

Rectified Tile

Yes, grout should be flush with rectified tiles as well. Grout should generally be flush with any square-edged tiles, including rectified tiles.

Wall, Floor, And Shower Tile

Yes, grouting is advisable for all Shower, Floor, and Wall tiles. At the same time, it is supposed to be flush with the tiles as well. Especially in the case of floor tiles.

Backsplash Tile

Minimizing the width of grout lines in the case of backsplash tiles is advisable. Also, unsanded grout is preferred in the case of backsplash tiles. And yes, the grouting is supposed to be flush with the tile edges.

Wrapping Up: Should Grout Be Flush with Tile

Grouting is a great way to cover up differently shaped tiles placed together. At the same time, it also evens out and makes the tile surfaces look appealing and smooth.

Grouting isn’t only done for aesthetics; it is required to make tiled floors comfortable to walk on without feeling the edges. At the same time, there are proper grouting standards laid down that are called ‘Industry Standards’ that should be followed.

Grouting is done to protect the walls and structures from damage due to external factors.